The Art of Fiberglass & Polyethylene, Engineered with Innovation and Precision for Lasting Performance.

Litter & Recycling Bins

   3 4 5 6   

Updated: 20 October 2026

Mui Fatt supplies litter bins, recycling bins, wheel bins and leach bins (tong sampah and tong kitar semula) for schools, offices, malls, parks, housing estates, flats, markets, factories and councils across Malaysia. The range runs from a 10 L office bin to a 1,500 L leach bin emptied by a refuse truck.

The range uses two main materials. Polyethylene (PE and HDPE) is used for standing litter bins, hanging bins, wheel bins, chute bins and the 1,100 L leach bin. Fiberglass (FRP/GRP) is used for the multi-compartment recycling stations, the RS2700 square bin and the giant bottle recycling bin. A heavy mild steel leach bin completes the range.

The FRP recycling bin series is more durable than PE bins and can be an alternative to stainless steel bins. PE bins are offered as a companion range, for everyday litter points and kerbside collection alongside the FRP recycling stations.

Both PE and FRP bins do not rust, so they suit indoor and outdoor use in Malaysian sun and rain. Colours, recycling stickers and logos can be made to suit your recycling scheme or building.

This page is the guide to the whole range. Each section links to its sub-category, where every model is listed.

Litter and Recycling Bin Categories

Category What it covers Material Capacity
Recycling Bins → 1 to 4 compartment recycling stations, bottle-shaped bins, paper, bottle and can set Mostly FRP with PE inner liners; PE bottle bin Single bins to 4-stream stations
PE Litter Bins → Office bins, standing litter bins, hanging bins, refuse bins, chute bins UV-stabilised PE 10 L to 250 L
PE Bins - New Colours → Popular standing bins in soft designer colours UV-stabilised PE 60 L to 120 L
Wheel Bins / Mobile Garbage Bins (MGB) → 2-wheel and 4-wheel bins, recycling colour series, foot pedal bins, 1,000 L bulk bin HDPE (bulk bin: PE on a steel base) 120 L to 1,100 L
Leach Bins → Large bins lifted and emptied by refuse trucks Rotomoulded PE or mild steel 1,100 L and 1,500 L

PE vs FRP vs Stainless Steel Bins: Which Material?

PE bins are moulded in one piece from polyethylene. They are light, tough and easy to wash, and they come in a wide choice of standard colours. FRP bins are made of fiberglass with a smooth gelcoat surface. They are used where a bin needs several compartments, a large flat panel for signs, or a special shape or texture. The FRP recycling bin series is more durable than PE bins, and it can be used as an alternative where a stainless steel bin would otherwise be specified.

Factor PE / HDPE bins FRP bins Stainless steel bins
Typical products Standing litter bins, hanging bins, wheel bins, chute bins, PE leach bin RS2600 recycling stations, RS2500 3 in 1 bins, RS2700 square bin, giant bottle bin Not part of this range
Role in the range Companion range for everyday litter and collection points Main recycling bin series The FRP recycling series can be used as an alternative
Durability Tough, one-piece moulded body More durable than PE bins Ask us to compare FRP with your stainless steel specification
Construction One-piece moulded body; wheel bins injection moulded HDPE; leach and bulk bins rotomoulded PE Fiberglass reinforced plastic (FRP/GRP); recycling stations hold lift-out PE inner liners Metal body
Rust Does not rust Does not rust and needs no painting -
Outdoor use UV-stabilised for sun and rain Suits indoor and outdoor areas -
Colours 17 standard PE colours, stone finishes at extra cost, plus the New Colours range Solid, metallic or granite colours; terracotta, wood or stone textures on request -
Branding Wheel bins: embossing, hot stamping, screen printing and numbering Recycling stickers and company logo or advertising stickers on the panels -
Emptying Lift-out PE liner on many standing bins; bin bag on others; truck lifting for wheel and leach bins Recycling station liners lift out one at a time; the FRP bottle bin has a front door -

In simple terms, choose FRP for durable recycling stations where people sort several waste streams at one point, or as an alternative to stainless steel bins. Add PE bins from the companion range for everyday litter points and kerbside collection.

Recycling Bins (Tong Kitar Semula)

Most Mui Fatt recycling bins are FRP cabinets with removable PE inner liners, from 1 to 4 compartments, so paper, plastic, cans and general waste can be separated at one point. Bottle-shaped bins in FRP or PE make recycling easy to spot at schools, malls and events.

Recycling Bin Models and Sizes

Model Type Size (L x W x H, mm) Body
RS2640 → 4 compartments, 4 PE liners 1,580 x 400 x 800 FRP
RS2630 → 3 compartments, 3 PE liners 1,180 x 400 x 800 FRP
RS2500 Combo 3 in 1 → 3 compartments under one cover 1,100 x 380 x 810 FRP
RS2620 → 2 compartments, 2 liners 780 x 400 x 800 FRP
RS2700 → Single square bin, 80 L, 3 liners 335 x 335 x 785 FRP
FRP Bottle Recycling Bin → Giant bottle shape, front door for emptying 540 dia x 1,810 FRP
PE Bottle Recycling Bin → Bottle shape, round 150 mm opening 434 dia body PE
RC1300D Paper, Bottle and Can Set → Set of 3 shaped bins, 80 L each 520 to 600 dia x 1,350 to 1,800 See product page

The RS2630 is also listed in ready red, black and yellow versions. For large recycling volumes, the MGB wheel bins come in recycling colour series (see below).

Recycling Bin Colours in Malaysia

In Malaysia, recycling bins are colour coded: blue is for paper, brown is for glass, and orange is for plastic and aluminium. Mui Fatt's MGB 3 in 1 Recycling Series uses these three colours. The 4 in 1 Recycling Series adds a yellow bin for a fourth stream that your site chooses, and labels can be printed to match.

  • Blue: paper
  • Brown: glass
  • Orange: plastic and aluminium
  • Yellow (4 in 1 series): a fourth stream chosen by your site
  • Green: the standard colour for MGB wheel bins

FRP recycling stations can be made in your own colour scheme, with recycling stickers for each opening. For more on choosing and using recycling bins, read our recycle bins Malaysia guide →.

PE Litter Bins (Tong Sampah Plastik)

Mui Fatt PE bins are moulded from UV-stabilised polyethylene, so they do not rust and stand up to Malaysian sun and rain. More than 30 models cover office bins, slim standing bins, large standing litter bins, hanging bins, sanitary bins, refuse bins and refuse chute bins. Many standing bins take a lift-out PE liner. The Majesty 85L and Flip Flop 60L are made by Mui Fatt Industries Sdn Bhd.

PE Litter Bins by Size

Size Models Typical use
10 to 30 L Pro Bin 10L → Evon 16L → Lulu 16.5L → Lili 20L → Wally 25L → Sanitary Bin 30L → Offices, classrooms, lobbies, toilets
Hanging and pole bins Bringo 28L → Slimline 30L → Diana 40L Pole Bin → Poswal 45L → Walls, posts and walkways
40 to 60 L Wally 45L → Mini Matrix 50L → Penang 60L → Flip Flop 60L → Jumbo 60L → Pyramid 60L → Avery 60L → Robby 60L → Corridors, food courts, shop lots
65 to 90 L PYLSU 65L/80L → Intan 75L → Bintang 80L → Litter Queen 85L → Litter King 85L → Bobo 85L → Kiddo 85L → Majesty 85L → Putra 90L → Parks, walkways, building entrances
100 to 150 L Matrix 100L → Basko 100L → Holli 120L → Carol 120L → Superbug 120L → Avery 120L → Robby 120L → Litter Boss 150L → Roman 150L → Busy public areas, plazas, housing areas
95 to 250 L chute bins RCB Refuse Chute Bin → Rubbish chute rooms in flats and condominiums

See every model in PE Litter Bins →.

PE Bin Colours

Most PE bins can be made in the 17 standard colours of the Mui Fatt PE colour chart: purple, green, magenta, grey, red, yellow, solid white, light blue, orange, beige, dark green, brown, blue, black, dark blue, dark grey and terracotta. Stone finishes (S.Stone, Pink Granite, Millstone and Rosetta Stone) cost extra. Colours on screen are for illustration and may differ from the actual product. See the Mui Fatt PE Colour Chart →.

PE Bins in New Colours

The New Colours range offers six popular standing bins in soft designer shades for malls, resorts, parks and housing developments that want bins to match the landscape. They are the same PE bins as the standard range; only the colour changes.

Model Capacity Colour
Superbug 60L → 60 L Luminary Green
Flip Flop 60L → 60 L Peach Nectar
Fauna 85L → 85 L Cerulean
Majesty 85L → 85 L Living Coral
Putra 90L → 90 L Yellow Iris
Carol 120L → 120 L Peanut Butter

See the range in PE Bins - New Colours →.

Wheel Bins and Mobile Garbage Bins (MGB)

Mui Fatt mobile garbage bins (tong sampah beroda) are injection moulded HDPE wheel bins from 120 to 1,100 litres for homes, housing estates, councils, factories and commercial buildings. They have a hinged lid that closes over the rim, a toothed rim for lifting by refuse trucks, and solid rubber wheels on steel axles on the 2-wheel sizes. The bins are made to EN 840 for mobile waste containers.

Wheel Bin Sizes

Model Capacity Size (W x L x H, mm) Wheels
MGB120 → 120 L 460 x 550 x 940 2
MGB120 with Foot Pedal → 120 L 476 x 555 x 957 2
MGB240 → 240 L 590 x 730 x 1,007 2
MGB240 with Foot Pedal → 240 L 575 x 730 x 1,130 2
MGB360 → 360 L 730 x 850 x 1,140 2
MGB660 → 660 L 1,340 x 915 x 1,260 4
MGB1100 → 1,100 L 1,340 x 1,030 x 1,330 4
1000L PE Bulk Bin → 1,000 L 1,490 x 845 x 1,020 (L x W x H) Rubber wheels on a mild steel base, foot-pedal brake

Recycling Colour Series and Options

  • 3 in 1 Recycling Series: 120, 240 and 660 L bins in blue, brown and orange, for example the MGB240 3 in 1 →.
  • 4 in 1 Recycling Series: adds a yellow bin, for example the MGB240 4 in 1 →.
  • Foot pedal: hands-free lid on 120 and 240 L bins, also in dark grey for the 120 L.
  • Marking: embossing, hot stamping, screen printing, numbering and council logos.
  • Standard colour: green.

The PE Litter Bins range also includes the Roller King 120L / 240L Wheel Bin →, a PE 2-wheel bin with a hinged lid, and a Roller King 240L with Flip Door Cover →.

See all sizes in Wheel Bins / Mobile Garbage Bins (MGB) →.

Leach Bins (Tong Sampah Besar)

Leach bins are large wheeled refuse bins emptied by the lifting arm of a refuse truck, for housing estates, flats, markets, factories and councils. Mui Fatt offers a rotomoulded PE leach bin that does not rust and a heavy mild steel version.

Model Capacity Build Size
PE Leach Bin → 1,100 L One-piece rotomoulded PE body, mild steel frame, four 6 inch rubber wheels 1,610 x 1,345 mm at the top, 1,610 x 820 mm at the base, 950 mm deep body
Mild Steel Leach Bin → 1,500 L 2 mm mild steel, painted green, 6 inch cast iron wheels 1,600 x 1,370 mm, 960 mm body, 1,150 mm overall

Choose PE for a bin that does not rust, is lighter to push and is easy to wash. Choose mild steel for a larger, very rigid bin for heavy waste. Both are made to fit the lifting arms used by refuse trucks in Malaysia. See Leach Bins →.

How to Choose the Right Bin

Where Suggested bins
Offices, classrooms and lobbies 10 to 45 L PE bins such as Pro Bin, Evon or Poswal; RS2620 or RS2630 for recycling
Schools and recycling campaigns RS2630 or RS2500 Combo 3 in 1; bottle-shaped bins; MGB 3 in 1 or 4 in 1 series
Parks, walkways and malls 60 to 150 L PE standing bins, or the New Colours range
Houses and shop lots 120 or 240 L wheel bins
Shops and restaurants 240 or 360 L wheel bins
Flats, bin centres and factories 660 or 1,100 L four-wheel bins, RCB chute bins, leach bins
Factory yards and warehouses 1000L PE bulk bin on a steel base

How to Order

To get a quotation, send us:

  • The model or type of bin, or where it will be used
  • Capacity and quantity
  • Colours, including recycling colours for each stream
  • Sticker artwork, logo, printing or numbering
  • Liner requirement for standing bins
  • For leach bins, details of your refuse truck lifting arm if unsure
  • Delivery site

Frequently Asked Questions About Litter and Recycling Bins

What types of bins does Mui Fatt supply?

Mui Fatt supplies PE litter bins, FRP and PE recycling bins, HDPE wheel bins (MGB) and PE or mild steel leach bins. Sizes run from a 10 L office bin to a 1,500 L leach bin.

What is the difference between PE and FRP bins?

PE bins are moulded in one piece from polyethylene, while FRP bins are made of fiberglass, and most FRP recycling stations hold PE inner liners. The FRP recycling bin series is more durable than PE bins and is used for multi-compartment recycling stations and special shapes, in custom colours and textures. PE bins are a companion range for everyday litter bins and wheel bins, in 17 standard colours.

What do the recycling bin colours mean in Malaysia?

Blue is for paper, brown is for glass, and orange is for plastic and aluminium. In the MGB 4 in 1 Recycling Series, a yellow bin is added for a fourth stream that your site chooses.

Which recycling bin suits a school or office?

A 3-compartment bin such as the RS2630 or RS2500 Combo 3 in 1 suits most schools and offices. It separates paper, plastic and cans at one point. For a lobby or event, the bottle-shaped bins draw attention to recycling.

What sizes of PE litter bins are available?

PE litter bins run from the 10 L Pro Bin to 150 L standing bins, with refuse chute bins up to 250 L. There are more than 30 models, including hanging bins and sanitary bins.

Which wheel bin size do I need?

A 120 or 240 L wheel bin suits a house, 360 L suits shops, and 660 or 1,100 L four-wheel bins suit flats, councils and factories.

Are the wheel bins made to a standard?

Yes. The MGB wheel bins are made to EN 840 for mobile waste containers.

What is a leach bin?

A leach bin is a large wheeled refuse bin that a refuse truck lifts and empties with its lifting arm. Mui Fatt offers a 1,100 L rotomoulded PE leach bin and a 1,500 L mild steel leach bin.

Can bins be made in our colours or carry our logo?

Yes. FRP recycling bins can be made in your colours with recycling stickers and logos. Most PE bins come in 17 standard colours, and wheel bins can be embossed, hot stamped, screen printed or numbered.

Can FRP recycling bins be used instead of stainless steel bins?

Yes. The FRP recycling bin series can be an alternative to stainless steel bins. It does not rust, needs no painting and can be made in custom colours and textures with recycling stickers. Send us your requirement to discuss a suitable FRP model.

Do the bins come with inner liners?

Many do. FRP recycling stations come with PE inner liners, and many PE standing bins take a lift-out PE liner. Some bins, such as the Basko, Roller King and chute bins, use a bin bag instead. Ask about liners when ordering.

How do I get a quote?

Send us the bin model, capacity, quantity, colours, any logo or sticker artwork and the delivery site through the contact page. Our team will reply with a quotation.

Ringkasan: Mui Fatt membekalkan tong sampah plastik PE, tong kitar semula fiberglass (FRP) dan PE, tong sampah beroda (MGB) HDPE 120 hingga 1,100 liter, dan tong sampah besar (leach bin) PE 1,100 liter serta keluli lembut 1,500 liter. Warna tong kitar semula: biru untuk kertas, coklat untuk kaca, oren untuk plastik dan aluminium.

Request a Quote

Looking for litter bins, recycling bins or wheel bins for your school, building, estate or factory? Tell us the bin type, capacity, quantity, colours and any logo or sticker artwork, and we will reply with a quotation.

Get a Quote →

Looking For Reliable Fibreglass
Or Polyethylene Products?

Talk to our team today. We’ll help you find the right solution for your business needs.

Get a Quote
CTA Background
WhatsApp
TikTok
Facebook
LinkedIn