The Art of Fiberglass & Polyethylene, Engineered with Innovation and Precision for Lasting Performance.

Cold Water Storage Tanks

   2 3 4 5 6   

Updated: 20 October 2026

Mui Fatt Marketing Sdn Bhd in Port Klang, Selangor, supplies cold water storage tanks (tangki air) across Malaysia in two materials: polyethylene (PE) tanks from 30 to 4,400 gallons, and Mui Tank fiberglass (FRP) tanks from 60 to 27,680 gallons. Both ranges are SIRIM certified, registered with SPAN and carry an 8-year outdoor and 10-year indoor warranty.

The PE tanks are rotomoulded in one piece from 100% virgin, food-grade, UV-stabilised LLDPE (linear low-density polyethylene) by Mui Fatt Industries Sdn Bhd. The Mui Tank range is made in one piece of fiberglass reinforced polyester by our subsidiary Y.T. Fibreglass Industries Sdn Bhd, using hand lay-up and filament winding, and is certified to MS 1241:2011.

This page helps you choose between PE and FRP, pick a size in litres or gallons, and decide between a closed top and an open top tank. Each section links to the range where every model is listed. All gallons on this page are imperial gallons.

Water Tank Categories

Category What it covers Capacity
Polyethylene Water Tanks (PE Tanks) → Rotomoulded LLDPE tanks in three series: CT, BUMI and SEGI 30 to 4,400 gallons
CT Closed Top PE Water Tanks → Round, sealed PE tanks with a manhole 200 to 4,400 gallons
Open Top PE Water Tanks (BUMI and SEGI) → House roof tanks with a removable cover 30 to 600 gallons
BUMI Round Open Top PE Water Tanks → Round open top PE tanks, plus special sizes 50 to 600 gallons
SEGI Square and Rectangular PE Water Tanks → Square or rectangular PE tanks with rounded corners, for low or narrow spaces 30 to 400 gallons
FRP Fiberglass Mui Tanks → One-piece FRP tanks, closed top and open top, standard and custom sizes 60 to 27,680 gallons
Mui Tank Closed Top Round FRP Water Tanks → Sealed round FRP tanks in six diameters, 1.2 to 4.0 m 250 to 27,680 gallons
Mui Tank Open Top FRP Water Tanks → Open top FRP tanks with a lid, round or square 60 to 1,760 gallons
Mui Tank Open Top Round FRP Water Tanks → MT-220/C to MT-880/C, all 1 m high 220 to 880 gallons
Mui Tank Open Top Square and Rectangular FRP Tanks → MT-60 to MT-1760 for roofs, corners and plant rooms 60 to 1,760 gallons

PE vs FRP (Mui Tank): Which Water Tank Material?

PE tanks are light, seamless and come in fixed models, which makes them a practical choice for house roof tanks and everyday cold water storage up to 4,400 gallons. Mui Tank FRP tanks are the stronger material: they go much larger, can be made to custom sizes, and the closed top tanks can be designed for underground use.

Factor PE water tanks FRP Mui Tanks
Material 100% virgin, food-grade, UV-stabilised LLDPE Fiberglass reinforced polyester (FRP/GRP)
How it is made Rotational moulding, one seamless piece Hand lay-up and filament winding, one piece
Made by Mui Fatt Industries Sdn Bhd Y.T. Fibreglass Industries Sdn Bhd
Capacity 30 to 4,400 gallons (about 136 to 20,000 litres) 60 to 27,680 gallons (about 270 to 125,800 litres)
Shapes CT closed top round; BUMI open top round; SEGI open top square or rectangular Closed top round (1.2 to 4.0 m diameter); open top round; open top square or rectangular
Sizes Fixed models, plus special-size versions with the same capacity in a different footprint Standard models, and custom sizes made to order
Strength Lightweight and easy to handle Stronger material; square tanks of 880 gallons and above have steel reinforcement laminated in FRP
Underground Not recommended Closed top tanks can be designed for underground installation
Standard and registration SIRIM certified to MS 1225; registered with SPAN for potable drinking water storage SIRIM certified to MS 1241:2011; registered with SPAN for water supply systems, up to 100,000 litres (22,000 gallons)
Warranty 8 years outdoor, 10 years indoor 8 years outdoor, 10 years indoor
Cost Usually the lower-cost option Depends on size, shape and specification

In simple terms: choose PE for a standard house or shop tank where a fixed size fits. Choose a Mui Tank when you need more than 4,400 gallons, a custom size, a stronger tank, or an underground tank.

Which Tank Do I Need? Sizing Guide

1. Work out the volume in litres or gallons

Mui Fatt lists tank capacities in imperial gallons, and most sizes also show litres. One cubic metre is 1,000 litres or 220 imperial gallons, so one imperial gallon is about 4.54 litres.

Litres Imperial gallons Example tanks
1,000 L (1 m³) 220 gal MT-220, MT-220/C
about 1,360 L 300 gal BM 250-300, SG 250-300, MT-300
2,000 L (2 m³) 440 gal MT-440, MT-440/C
about 2,270 L 500 gal BM 400-500, CT 400-500
3,000 L (3 m³) 660 gal MT-660, MT-660/C
about 4,540 L 1,000 gal CT 900-1000, Mui Tank closed top
about 20,000 L (20 m³) 4,400 gal CT 4000-4400 (largest PE tank)
about 125,800 L 27,680 gal Largest 4.0 m diameter Mui Tank closed top

PE model names show two numbers. In BM 250-300, the first number is the effective capacity (250 gallons) and the second is the nominal capacity (300 gallons).

2. Closed top or open top?

A closed top tank has a sealed top with a manhole. It keeps out dust, leaves, insects and light, and it suits outdoor installations and larger volumes. An open top tank has a removable cover or lid, so the inside is easy to reach for inspection and cleaning. Open top tanks are the usual house roof tank in the ceiling space.

3. Measure the space

For a roof or ceiling space, measure the opening the tank must pass through and the height under the roof. Round tanks (BUMI, MT-C models) spread water pressure evenly. Square and rectangular tanks (SEGI, MT models) use floor space better in low or narrow spaces. Special sizes, such as SEGI models ending in A, B or C, and the MT-880-A (2 m long, 1 m wide, 2 m high), keep the capacity in a different footprint.

4. Match the tank to the job

Your need Tanks to consider
House roof or ceiling space BUMI BM 250-300 or BM 400-500; SEGI for a low ceiling; Mui Tank open top square or round
Shops, offices and small buildings Open top PE up to 600 gallons, or Mui Tank open top up to 1,760 gallons
600 to 4,400 gallons CT closed top PE tank, or Mui Tank closed top
More than 4,400 gallons, up to 27,680 gallons Mui Tank closed top, 2.4 to 4.0 m diameter
Custom size or underground tank Mui Tank FRP, made to order
Very large or modular storage, or a site with restricted access FRP/GRP sectional panel water tank (see below)

5. Drinking water

Both ranges are registered with SPAN. The PE tanks are registered with SPAN for potable drinking water storage and use food-grade LLDPE. Mui Tank FRP tanks are certified to MS 1241:2011 and registered with SPAN for water supply systems. Ask us for copies of the certificates for your submission.

Very Large Storage: FRP/GRP Sectional Panel Tanks

A one-piece Mui Tank goes up to 27,680 gallons. For larger volumes, or where a one-piece tank cannot be brought in, choose an FRP/GRP sectional panel water tank. It is built from FRP panels bolted together on site, so the parts can be carried through restricted access routes. Sectional panel tanks are made to MS 1390:2010 and suit potable water storage. See FRP/GRP Sectional Panel Water Tank →.

Applications

  • Homes: house roof tanks (tangki air rumah) for domestic water supply
  • Shops, offices and commercial buildings: cold water domestic supply
  • Factories: industrial water holding
  • Rainwater harvesting: collection and storage tanks
  • Farms: agricultural water storage and fish farming (Mui Tank FRP)

Installation and Accessories

  • Place the tank on a flat, rigid, continuous base that supports the whole tank bottom.
  • Support connected pipes and valves on their own, so their weight does not pull on the tank fittings.
  • Never lift a tank when it is full.
  • For closed top Mui Tanks, the installation guide specifies an even concrete platform at least 250 mm above ground level.
  • PE tanks of 3,000 gallons and above come with an internal and external ladder and a level indicator. Mui Tanks can be supplied with level indicators, internal and external ladders, railings and cage ladders.
  • Clean PE tanks every 12 months with clean water or a mild detergent and a soft sponge; do not use wire brushes or abrasive chemicals.

How to Order

To get a quotation, send us:

  • The capacity you need, in litres or gallons
  • PE or FRP, and closed top or open top
  • The space available: length, width and height, or the roof opening and height
  • Where the tank will sit: roof or ceiling, ground platform, elevated stand or underground
  • Use: drinking water, rainwater, farm or industrial
  • Quantity and delivery site

Browse every PE and fiberglass tank at a glance in our water tank selection guide →.

Frequently Asked Questions About Cold Water Storage Tanks

What cold water storage tanks does Mui Fatt supply?

Mui Fatt supplies PE water tanks from 30 to 4,400 gallons and Mui Tank fiberglass (FRP) water tanks from 60 to 27,680 gallons. PE tanks come in the CT closed top, BUMI round open top and SEGI square open top series. Mui Tanks come in closed top round, open top round and open top square or rectangular shapes.

What is the difference between PE and FRP Mui Tank water tanks?

PE tanks are rotomoulded in one piece from food-grade LLDPE, are lightweight, come in fixed sizes and usually cost less. Mui Tank FRP tanks are made of fiberglass reinforced polyester, are the stronger material, can be made to custom sizes and go up to 27,680 gallons. Closed top Mui Tanks can be designed for underground use, while PE tanks are not recommended underground.

Are tank capacities in litres or gallons?

Capacities are listed in imperial gallons, and most sizes also show litres. One cubic metre is 1,000 litres or 220 imperial gallons, so a 2,000 litre tank is about 440 gallons and a 1,000 gallon tank is about 4,540 litres.

Which water tank size do I need for a house?

Most houses use a BUMI BM 250-300 (300 gallons) or BM 400-500 (500 gallons) PE tank in the roof space. Measure the ceiling opening and the height under the roof first. For a low ceiling, choose a SEGI square tank or a special size.

Should I choose a closed top or an open top tank?

Choose a closed top tank when you want a sealed top that keeps out dust, leaves, insects and light, for outdoor use or larger volumes. Choose an open top tank with a removable cover when easy access for inspection and cleaning matters, such as a house roof tank.

Are the tanks SIRIM certified and registered with SPAN?

Yes. PE tanks are SIRIM certified to MS 1225 and registered with SPAN for potable drinking water storage. Mui Tank FRP tanks are SIRIM certified to MS 1241:2011 and registered with SPAN up to 100,000 litres (22,000 gallons). Copies of the certificates are available on request.

Can I store drinking water in these tanks?

Yes. The PE range uses 100% virgin food-grade LLDPE and is registered with SPAN for potable drinking water storage. Mui Tank FRP tanks are certified to MS 1241:2011 and registered with SPAN for water supply systems; tell us the model and we will confirm its certificate.

Which tank is best for a rooftop or ceiling space?

Open top tanks are the usual choice. BUMI round PE tanks suit roofs with height to spare, SEGI square PE tanks fit low or narrow ceilings, and Mui Tank open top round tanks are all 1 m high. The MT-880-A, 2 m long, 1 m wide and 2 m high, fits narrow spaces.

Can a water tank be installed underground?

Only an FRP tank. Closed top Mui Tanks can be designed for underground installation, so send us your site details. PE tanks are not recommended for underground installation.

What is the largest water tank available?

The largest PE tank is the CT 4000-4400 at 4,400 gallons. The largest one-piece Mui Tank is a 4.0 m diameter closed top tank of up to 27,680 gallons. For larger or modular storage, choose an FRP/GRP sectional panel water tank assembled on site.

What do PE model names such as BM 250-300 or SG 70-100 A mean?

BM is the BUMI series, SG is the SEGI series and CT is the closed top series. The first number is the effective capacity and the second is the nominal capacity in gallons. A letter such as A, B, C, S, D, E or N marks a special size with the same capacity in a different footprint or height.

How thick are the tank walls?

For Mui Tank open top square tanks, the catalogue gives 4 mm for MT-220 and MT-440, 5 mm for MT-660, 6 mm for MT-880, 7 mm for MT-1320 and 8 mm for MT-1760. Closed top Mui Tanks and PE tanks vary by model, so ask us for the datasheet of the tank you need.

What warranty do the tanks have?

Both the PE tanks and the Mui Tank FRP tanks carry an 8-year warranty for outdoor installation and a 10-year warranty for indoor installation, for cold water storage under the warranty conditions. Correct installation and handling are needed for warranty cover.

How do I get a quote or delivery?

Send us the capacity, PE or FRP, closed or open top, the space available, the quantity and the delivery site through the contact page. Our team will reply with a quotation; the delivery charge depends on the order and the delivery site.

Ringkasan: Mui Fatt membekalkan tangki air untuk simpanan air sejuk di seluruh Malaysia: tangki air PE (LLDPE gred makanan) 30 hingga 4,400 gelen dalam siri CT, BUMI dan SEGI, dan tangki air fiberglass Mui Tank (FRP) 60 hingga 27,680 gelen. Kedua-duanya diperakui SIRIM dan berdaftar dengan SPAN, dengan waranti 8 tahun luar bangunan dan 10 tahun dalam bangunan. Semua gelen ialah gelen imperial (1 m³ = 1,000 liter = 220 gelen).

Get a Quote

Need a water tank for your house, building, farm or factory? Tell us the capacity, PE or FRP, closed or open top, the space available and the delivery site, and we will reply with a quotation.

Get a Quote →

Looking For Reliable Fibreglass
Or Polyethylene Products?

Talk to our team today. We’ll help you find the right solution for your business needs.

Get a Quote
CTA Background
WhatsApp
TikTok
Facebook
LinkedIn