FRP/GRP Cable Support System for Data Centres: Trays and Brackets
Non-metallic FRP/GRP cable support system for data centres and industry: ladder trays, channel trays, brackets, fittings and hardware, 50 to 1,200 mm wide and 50 to 150 mm deep, ISO, vinyl ester or halogen-free resin.
FRP/GRP Cable Support System for Data Centres: Trays and Brackets
The FRP/GRP cable support system is a complete non-metallic set of ladder trays, channel trays, support brackets, fittings and mounting hardware for data centres, telecom rooms and industrial cable routes. Widths run from 50 to 1,200 mm and depths from 50 to 150 mm. Being fiberglass, it does not conduct electricity, does not rust and is light to install above raised floors and in ceiling voids.
Ringkasan: Sistem sokongan kabel FRP/GRP bukan logam untuk pusat data: dulang tangga, dulang saluran, braket dan kelengkapan, lebar 50 hingga 1,200 mm, dalam 50 hingga 150 mm. Tidak mengalirkan elektrik dan tidak berkarat.
Specifications
| Parts | Ladder-type trays, channel trays, support brackets, fittings and mounting hardware |
|---|---|
| Fittings | Elbows, risers, tees and reducers |
| Widths | 50 to 1,200 mm |
| Depths | 50 to 150 mm |
| Resin | Isophthalic, vinyl ester or halogen-free |
| Fire | Fire-retardant options |
| UV | UV-resistant |
| Load rating | TBA, per tray size and span |
Material and Features
- Material: Fiberglass reinforced plastic (FRP/GRP)
- Non-conductive: insulates the support from live cables
- No rust: suits humid plant rooms and coastal sites
- Light: easier to lift and hang than steel
- Halogen-free option: for rooms where low smoke toxicity matters
- Flexible fittings: connects to existing cable routes
Where It Is Used
- Data centres and IT hubs
- Telecom rooms and network facilities
- Industrial electrical systems
- Tunnels and utility corridors
- Marine and offshore cable routes
Frequently Asked Questions
Why use FRP cable trays in a data centre?
FRP does not conduct electricity, does not rust and is light, so trays are safer near live cables and easier to install overhead.
What sizes are available?
Trays from 50 to 1,200 mm wide and 50 to 150 mm deep, with matching brackets and fittings.
Which resin should I choose?
Isophthalic for general use, vinyl ester for chemical areas, or halogen-free where low smoke toxicity is required. Fire-retardant options are available.
Can it connect to my existing cable routes?
Yes. Elbows, risers, tees and reducers let the system join existing routes.
Berapa harga sistem sokongan kabel FRP?
Harga bergantung kepada saiz, panjang laluan dan kelengkapan. Hubungi kami untuk harga terkini.
Related Products
FRP conduit hanger →, TRUGRID FRP cable trays →, FRP cable support selection guide →.
See the full range in FRP Cable Ladders and Cable Trays →.
