RB-100 PE Road Barrier 1 m, Water-Filled
RB-100 water-filled road barrier, 1.00 m long, 0.50 m wide and 0.81 m high. One-piece rotomoulded LLDPE with UV stabilisers, light enough for one person to place empty, then filled with water and interlocked.
RB-100 PE Road Barrier 1 m, Water-Filled
The RB-100 is a plastic road barrier, 1.00 m long, 0.50 m wide and 0.81 m high, made in one piece by rotomoulding at our Port Klang plant. It is moulded from linear low density polyethylene (LLDPE) with UV stabilisers. Empty, one person can carry and place it; filled with water it becomes heavy and stable, and units interlock end to end to form a continuous line for road works, lane closures and site perimeters.
Ringkasan: RB-100 ialah penghalang jalan plastik (PE) 1.00 x 0.50 x 0.81 m, diacuan putar daripada LLDPE dengan penstabil UV di kilang Port Klang. Ringan semasa kosong, diisi air supaya stabil dan boleh disambung antara satu sama lain untuk kerja jalan dan tapak bina.
Specifications
| Model | RB-100 |
|---|---|
| Length | 1,000 mm (1.00 m) |
| Width | 500 mm (0.50 m) |
| Height | 810 mm (0.81 m) |
| Weight, empty | Under 18.5 kg |
| Wall thickness | 4 mm minimum |
| Material | LLDPE with UV stabilisers |
| Process | Rotomoulded in one piece |
| Ballast | Water, fill at least three quarters |
| Colour | Fluorescent orange and white, used alternately |
| Accessories | Inlet cap, outlet cap, reflector stickers |
| Manufacturer | Mui Fatt Industries Sdn Bhd, Port Klang |
Material and Features
- One-piece moulding: no welded seams, so the body does not crack or leak like joined barriers
- UV stabilised LLDPE: made for Malaysian sun and rain, and resists corrosive chemicals and acids
- Interlocking ends: units join to form a continuous line that spreads an impact along the row
- Water ballast: carry it empty, fill it on site from a water truck, drain it to move
- High visibility: orange and white units set alternately, with reflector stickers for night use
Where It Is Used
- Lane closures and diversions during road works
- Construction site and utility trench perimeters
- Car parks, toll plazas and checkpoints
- Event crowd lines and temporary traffic control
- Factory and port yards that need movable separation
Setting Up the Barrier
Place the empty units in a line, lock the ends together, then fill each one with water to at least three quarters through the inlet cap. Fit the outlet cap tightly before filling. To move the line, open the outlet, drain the water and lift each unit away. Add the H-180 hoarding board → on top when the site must be screened.
Frequently Asked Questions
How do I fill the RB-100?
Open the inlet cap on top and fill with water from a hose or water truck. Fill it at least three quarters full for good stability, then close the cap.
How heavy is it?
Under 18.5 kg empty, so one person can place it. Filled with water it becomes much heavier and stays in place.
Can the barriers be linked?
Yes. The ends interlock so a row of RB-100 units forms one continuous barrier.
Is it suitable for outdoor use all year?
Yes. The LLDPE contains UV stabilisers and is designed for heat and harsh weather.
Berapa harga penghalang jalan RB-100?
Harga bergantung kepada kuantiti dan lokasi penghantaran. Hubungi kami untuk harga terkini.
Related Products
Screen the site with the H-180 PE hoarding board →, guide traffic with the TC-30 traffic cone → and mark lanes with the FP-28 flexible safety post →.
See the full range: Road Barrier and Safety Cones →
